40a203f254
Peter on IRC reported some build failures for different targets. They were of two kinds: - missing/unknown stack unwinding support - missing *_chk functions The first is about configure not being able to automagically determine if stack unwinding support is available for the target. The second is about fortified build forgetting to build the fortified functions. This applies to both glibc and eglibc. After some discussions on IRC with Jacmet, it appears that we can safely assume both of the following: - virtually all targets of buildroot will have stack unwinding support - we do not care about fortified builds (so far) So, update the bundled crosstool-NG .config file to saner defaults: - force unwind support - disable fortified builds [Peter: fix 'force non-fortified build' sed invocation] Reported-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To build and use the buildroot stuff, do the following:
1) run 'make menuconfig'
2) select the packages you wish to compile
3) run 'make'
4) wait while it compiles
5) Use your shiny new root filesystem. Depending on which sort of
root filesystem you selected, you may want to loop mount it,
chroot into it, nfs mount it on your target device, burn it
to flash, or whatever is appropriate for your target system.
You do not need to be root to build or run buildroot. Have fun!
Offline build:
==============
In order to do an offline-build (not connected to the net), fetch all
selected source by issuing a
$ make source
before you disconnect.
If your build-host is never connected, then you have to copy buildroot
and your toplevel .config to a machine that has an internet-connection
and issue "make source" there, then copy the content of your dl/ dir to
the build-host.
Building out-of-tree:
=====================
Buildroot supports building out of tree with a syntax similar
to the Linux kernel. To use it, add O=<directory> to the
make command line, E.G.:
$ make O=/tmp/build
And all the output files (including .config) will be located under /tmp/build.
More finegrained configuration:
===============================
You can specify a config-file for uClibc:
$ make UCLIBC_CONFIG_FILE=/my/uClibc.config
And you can specify a config-file for busybox:
$ make BUSYBOX_CONFIG_FILE=/my/busybox.config
To use a non-standard host-compiler (if you do not have 'gcc'),
make sure that the compiler is in your PATH and that the library paths are
setup properly, if your compiler is built dynamically:
$ make HOSTCC=gcc-4.3.orig HOSTCXX=gcc-4.3-mine
Depending on your configuration, there are some targets you can use to
use menuconfig of certain packages. This includes:
$ make HOSTCC=gcc-4.3 linux-menuconfig
$ make HOSTCC=gcc-4.3 uclibc-menuconfig
$ make HOSTCC=gcc-4.3 busybox-menuconfig
Please feed suggestions, bug reports, insults, and bribes back to the
buildroot mailing list: buildroot@uclibc.org